DYWIDAG Prestressing Systems using Bars

Equipment for stressing and grouting

DYWIDAG Prestressing Systems using Bars Equipment for stressing (Tensioning jack 110 Mp/60 Mp/Tensioning jack HOZ 200 Mp)

Tensioning jack 110 Mp/60 Mp                                       Tensioning jack HOZ 200 Mp                          

Dimensions (for Block-Out design)

Tensioning jacksLØEstrokepiston area
Ak		capacitymax. 
piston pressure		weightABØCØDF
  [mm][mm][mm][cm2][kN][bar][kg][mm][mm][mm][mm][mm]
60 Mp Series 04 40119050 132.5625500362251763)3)300
60 Mp Series 05 456190100132.5625500442252313)3)300
110 Mp Series 01 49426750 235.61100500462752194)4)375
110 Mp Series 03 594267150235.61100500542753194)4)375
200 Mp 865315150361.32000600172350515-270-
for type of barØCØD
  [mm][mm]
18 WR, 26 WR, 32 WS 3)105106
32 WR 3)135114
26 WR 4)122106
32 WS 4)125110
32 WR,
36 WR/WS 4)		125120
40 WR 4)134134
Equipment for stressing and grouting (Pump Type 77-193 A)
Pump Type 77-193 A
Equipment for stressing and grouting (Pump Type R 6.4)
Pump Type R 6.4

Hydraulic pumps

Hydraulic pumpsTensioning jacks
  60 Mp110 Mp200Mp
77-193-A
R 3.0 V
R 6.4



Pump typemax. operating pressureoil flow rateusable oil capacityweight with oli 1)dimensions
 LxWxH
  [bar][l/min][l][kg][mm]
77-193-A6003.01063420x380x480
R 3.0 V6003.01398600x390x750
R 6.46006.4703101400x700x1100

1) hydraulic pumps are supplied without oil

Grouting equipment mixing and pumping (Mixer MP 2000-5)
Mixer MP 2000-5

Grouting equipment (mixing and pumping)

 

Grouting equipmentmax. injection pressurecapacityweightdimensions LxWxH
  [bar][l/h][kg][mm]
MP 2000-5154203002000x950x1600