Cones for Climbing Formwork
DYWIDAG System for Climbing Formwork:
For the Anchorage of Climbing Formwork (Shear Loads) different systems can be used. In the following pages two standard systems are presented: a) DYWIDAG System b) Artéon System. Upon request we also develop and manufacture special solutions and products with individual design.
Positioning Cone
| Article-No. | Thread | Ø1/Ø2 | L | * | C1) | Weight |
| [mm] | [mm] | [mm] | [mm] | [mm] | [kg/pc] | |
| 15 F 3073 | 15F/M24 | 30/43 | 100 | 18 | 50 | 0.57 |
| 20 F 3073 | 20F/M27 | 33/46 | 130 | 20 | 65 | 0.78 |
| 26 E 3073 | 26E/M33 | 40/54 | 150 | 24 | 75 | 1.24 |
1) C = Concrete Cover, all Cones galvanized
Positioning Cones are put in place before concreting.
For de-installation, the square wrench .. F 7045 can be used.
Nail Plate
| Article-No. | Material | Thread | Ø | L | Hex | Weight |
| [mm] | [mm] | [mm] | [mm] | [kg/pc] | ||
| 15 F 3073/N | Steel | M24 | 60 | 40 | 12 | 0.11 |
| 15 F 3073/PE | PE | M24 | 48 | 25 | 14 | 0.01 |
| 20 F 3073/N | Steel | M27 | 65 | 25 | 12 | 0.20 |
| 20 F 3073/PE | PE | M27 | 58 | 25 | 14 | 0.02 |
| 26 E 3073/N | Steel | M33 | 75 | 25 | 12 | 0.30 |
Galvanized, for fixing of Positioning Cones at the formwork.
For de-installation, the square wrench 15 F 7043 can be used.
PE – Sleeve
| Article-No. | For Cone | L | Ø1/Ø2 | Weight |
| [mm] | [mm] | [kg/pc] | ||
| 15 F 3073/K | 15 F 3073 | 97 | 31/43 | 0.01 |
| 20 F 3073/K | 20 F 3073 | 110 | 34/44 | 0.01 |
| 26 E 3073/k | 26 E 3073 | 125 | 41/54 | 0.02 |
To ensure easy unscrewing of Positioning Cones, the PE-Sleeve is put on the cone before assembly.
Climbing Cone
| Article-No. | Ø1/Ø2 | L | Hex | X | Shear Load1) | Weight |
| [mm] | [mm] | [mm] | [mm] | [kN] | [kg/pc] | |
| 15 F 3038 | 30/43 | 155 | 55 | 35 | 30 | 1.28 |
| 20 F 3038 | 33/46 | 185 | 55 | 35 | 40 | 1.56 |
| 26 E 3038 | 40/54 | 210 | 55 | 35 | 50 | 2.50 |
Galvanized, 1) at concrete strength of min. 10 N/mm².
Cone for shear load, Positioning Cone has to be removed.
Hex Screw
| Article-No. | Thread | L | Hex | Material | Weight |
| [mm] | [mm] | [mm] | [kg/pc] | ||
| 15 F 3073/S | M24 | 1) | 36 | 10.9 | 1) |
| 20 F 3073/S | M27 | 1) | 41 | 10.9 | 1) |
| 26 E 3073/S | M33 | 1) | 50 | 10.9 | 1) |
1) Length according to customer requirements, standard lengths:
M 24 = 60 / 80 mm, M 27 = 60 / 80 mm, M 33 = 100 mm.
Hex Screw is screwed into Positioning Cone, which remains in the concrete and takes over the shear load (alternative solution to Climbing Cones).