DYWIDAG Ductile Iron Pile
Advantages and Characteristics
The pile system consists of driven ductile centrifugally cast pipes with conical couplers. Depending on the soil conditions, the ductile cast iron piles will be used as peak pressure or frictional piles.
- very fast and almost vibrationless pile production
- control of load capacity through correlation with driving rate
- can be used as permanent pile
- easy adaption of the pile length to different soil conditions
- no waste cuttings
- no reworking of the pile heads necessary
- light and easily moveable equipment allows pile production under limited space conditions
- small site equipment enables fast use
| type of pile | exterior diameter | wall thickness | cast iron cross section | concrete cross section | load capacity cast iron | load capacity concrete B25 | load capacity pile |
| ø x s | [mm] | [mm] | [cm2]* | [cm2] | [kN]* | [kN] | [kN] |
| 118x7.5 | 118.00 | 7.50 | 20.55 | 83.32 | 438 | 69 | 507 |
| 118x0.8 | 118.00 | 9.00 | 25.33 | 78.54 | 540 | 65 | 605 |
| 170x9.0 | 170.00 | 9.00 | 37.58 | 181.46 | 800 | 151 | 951 |
| 170x10.6 | 170.00 | 10.60 | 45.14 | 173.90 | 962 | 144 | 1,106 |
Interior load capacity of the driven cast iron pile after approval by DIBt (German Institute for Structural Engineering)
* (considering the corrosion rate)