Downloads read more ...
Technical Document Bar - Calculation of Elongation 1/2,
Filesize: 36 kB
Filesize: 36 kB
Technical Document Strands - Stressing Values and Stressing Record,
Filesize: 70 kB
Filesize: 70 kB
Approval ETA-05 0123 DYWIDAG PT Bar Tendon System,
Filesize: 2.5 MB
Filesize: 2.5 MB
Bonded Bar Post-Tensioning System
Equipment
| type | Smooth Bar | DYWIDAG THREADBAR ® | |||||||
| steel grade fp0.1k/fpk | 835/1030 | 1080/1230 | 835/1030 | 1080/1230 | |||||
| diameter/type | 32G | 36C | 26E | 32E | 36E | 26D | 32D | 36D | |
| diameter | 32 | 36 | 26.5 | 32 | 36 | 26.5 | 32 | 36 | |
| 60MP |  | | |  | | | |||
| 60MP |  | | | | | | |||
| use 60Mp if only stressed 55% to ultimate loadcan be stressed with 110Mp on certain exceptions | |||||||||
| jack types | length | O.D. | stroke | piston area | capacity | weight | |
| [mm] | [mm] | [mm] | [cm²] | [kN] | [MPa] | [kg] | |
| 60MP Series 04 | 401 | 190 | 50 | 132.5 | 625 | 50 | 36 |
| 60MP Series 05 | 456 | 190 | 100 | 132.5 | 625 | 50 | 44 |
| 110MP Series 01 | 494 | 267 | 50 | 235.6 | 1100 | 50 | 46 |
| 110MP Series 03 | 594 | 267 | 150 | 235.6 | 1100 | 50 | 54 |
| Jack Dimensions (for Block-Out design) | ||||||||||
| jack types | A | B | ØC 1 | ØD 1 | F | |||||
| [mm] | [mm] | [mm] | [mm] | [mm] | ||||||
| 60MP Series 04 | 225 | 176 | 106 | 106 | 300 | |||||
| 60MP Series 05 | 225 | 231 | 106 | 106 | 300 | |||||
| 110MP Series 01 | 275 | 219 | 125 | 120 | 375 | |||||
| 110MP Series 03 | 275 | 219 | 125 | 120 | 375 | |||||
| 1 ØC and ØD are estimated values, exact measures depend on the bar diameter and strength | ||||||||||