Injection Equipment
AT - Mortar-Mixing Pumps
For injection and infilling works, DSI recommends mortar mixing pumps of the type M400 NT and M400 EASY. Accessories and other types of mortar mixing pumps are available on request.
Characteristics of AT - Mortar-Mixing Pumps
- Tough design and galvanized pump-casing
- Low empty weight
- Simple operation and maintenance due to modular design
- Low start-up and cleaning times
- Minor breakdown susceptibility
- Low filling and overall height
- High delivery rate at continuous pressure
- Variable discharge
- All-purpose equipment
Specifications
| Parameter | Unit | M400 NT | M400 EASY |
| Nominal power | [kW] | 6,2 | 4,5 |
| Power supply | [V / Hz] | 400 / 50 | 400 / 50 |
| Min. requirement power set | [kVA] | 16 | 16 |
| Electrical connection | [A] | 3 x 12,1 (5-pole) | 3 x 9,5 (5-pole) |
| Min. fuse protection | [A] | 3 x 32 | 3 x 16 |
| Flow rate 1) | [l/h] | 400-2000 | 400-2000 |
| Max. delivery range | [m] | 60 | 40 |
| Max. operating pressure | [bar] | 40 | 40 |
| Length x width x height | [mm] | 1730 x 570 x 960 | 1520 x 585 x 900 |
| Total weight | [kg] | 217 | 136 |
1) Depending on the W/C ratio, consistency, and grain size distribution of the material as well as the delivery range