Repair of a Landmark using DYWIDAG Systems: The Church of St. George in Noerdlingen

The nearly 90m high tower of the Church of St. George, which is known as the Daniel, is a landmark in the Bavarian town of Noerdlingen.

The church was built in the 15th century and consists of porous suevite rock which can absorb water and salts. In the course of time, freezing water and crystallizing salts caused damage to the load-bearing pillars. Furthermore, core fractures have formed inside the church that limit the load-bearing capacity of the building.

Consequently, a fundamental repair of the pillars and girder axes is being carried out. One of the pillars in need of repair was temporarily replaced by a temporary steel structure. In order to take the load off the pillar, 4 CFRP Hydraulic Cylinders supplied by DYWIDAG-Systems International were placed underneath the structure and slightly loaded so that the temporary steel support could accommodate the loads.

To secure the nave during repair work, experienced employees of DYWIDAG-Systems International Germany installed transverse tendons across the nave. This tensioning system transferred the complete load from the pillars to the rest of the façade. The tensioned strands served to accommodate the loads inside the structure.

A total of 80m of Type 0.6“,St 1560/1770 strand, 3 195/195/35 anchor plates, 2 ME 6/2 anchor bushings, 4 M10x20mm hexagonal screws and 4 two-piece h6N for 140mm², SUSPA-Systems wedges were used for the repair work.

Owner

Evangelisch - Lutherische Kirchengemeinde Nördlingen, Germany

General Contractor

Matthias Wittner Steinbearbeitung und Restaurierung GmbH & Co. KG, Germany


Unit

DYWIDAG-Systems International GmbH, BU Equipment, German

Scope

technical support, rental of equipment

Products

4 CFRP Cylinders, 80m of Type 0.6“,St 1560/1770 strand, 3 195/195/35 anchor plates, 2 ME 6/2 anchor bushings, 4 M10x20mm hexagonal screws and 4 two-piece h6N for 140mm², SUSPA-Systems wedges

Back More Projects
DYWIDAG-Systems International

use our contact form